Extended Curved Spout Knurled Handle Hot And Cold Basin Faucet

Detailed description of the elongated curved handle faucet for the hot and cold face basin

Note: There may be slight errors in the manual measurement. Please refer to the actual product for accuracy.

Style 1: Standard Height This Shenchi extended-spout knurled handle hot and cold water basin faucet has a standard height of 17.50cm above the countertop. The extended spout extends 40-60mm further than a regular faucet, ensuring water flows directly into the center of the basin, effectively preventing splashing. The knurled handle has a non-slip texture, preventing slippage when wet, and provides smooth operation and precise temperature control. The 17.50cm height fits most undermount basins and standard countertop thicknesses, making it the most common size for residential bathrooms. Available materials include brass, SUS304, or SUS316L; valve cores can be copper or stainless steel.

Suitable for: Undermount basins, standard countertops (thickness≤5cm), residential bathrooms, rental properties, and budget renovations.

The Shenchi extended curved spout and knurled handle hot and cold water basin faucet has a total height of 30.50cm above the countertop, 13cm higher than the standard model. The taller design solves the problem of the faucet being too low when installed on thick countertops, providing more space between the spout and the basin for handwashing and face washing. The extended curved spout and knurled handle design are consistent with the standard model, and the functions are exactly the same. The 30.50cm height is suitable for countertop basins, thick countertops (countertop thickness exceeding 5cm), and scenarios requiring greater operating space.

Suitable Scenarios: Countertop basins, thick countertops, hotel projects, villa bathrooms, accessible handwashing stations, and places with high requirements for handwashing depth.

Product Parameters

Will white vinegar corrode stainless steel brushed faucets?

White vinegar has extremely low corrosiveness to stainless steel brushed faucets, but it must be used correctly. White vinegar is a weak acid, and short-term contact with SUS304 or SUS316L materials will not cause significant corrosion. The Shenchi extended curved spout knurled handle hot and cold basin faucets are made of brass, SUS304, or SUS316L, which have strong acid and alkali resistance. It is recommended to dilute white vinegar with water at a 1:3 ratio before use, soaking time should not exceed 5 minutes, and rinse immediately with clean water and dry. Prolonged soaking in high concentrations may darken the brushed surface. For daily cleaning, use a neutral detergent first; white vinegar should only be used occasionally to remove stubborn limescale.

How to replace the valve core of an extended curved knurled handle hot and cold basin faucet? Replacing the valve core involves four steps: First, shut off the water supply through the angle valve and open the faucet to drain the remaining water. Second, pry open the decorative cover on top of the knurled handle, unscrew the internal fixing screws, and remove the handle. Third, use a wrench to unscrew the valve core cap and remove the old valve core. Fourth, place the new valve core (copper or stainless steel) in its original position, and then reinstall the cap, handle, and decorative cover in sequence. The valve core specifications for Shenchi extended curved knurled handle hot and cold basin faucets are universal. After replacement, the hot and cold water direction and sealing performance must be tested. If you are unsure of the valve core model, please contact Shenchi sales customer service and provide the product batch number for verification.

Made in China with Extended Curved Spout and Knurled Handle: Quality Assurance for Hot and Cold Basin Faucets. This Chinese-made extended curved spout and knurled handle hot and cold basin faucets rely on a mature supply chain. The Shenchi brand has passed sealing tests and surface uniformity inspections. The extended curved spout features a thickened pipe wall design, ensuring no deformation even after long-term use. The knurled handle has a clear texture and provides lasting anti-slip performance. The brass version is sturdy and durable; SUS304 is corrosion-resistant with no risk of electroplating peeling; and SUS316L, containing molybdenum, offers the strongest salt spray resistance. Made in China, the supply chain is stable, and exporters can customize packaging and thread standards. Each batch of products has consistent dimensions, suitable for bulk procurement in engineering projects.